![]() |
![]() When Securing to Highchair, Shopping Cart Seat or Other Seating Devices: Anchor the tether to your seating device by using the swivel snap hook (A) alone or with the swivel snap hook and elastic loop (B). Most easily attached to your child’s existing strapping material in seating device. Loosen the adjustable loop (C) on the other end of the tether, insert child’s item and then tighten loop (C) to secure object by pulling fabric tight. Side-release buckle (D) can be used to make changing out items easier, by removing only the second half of the tether. |
![]() Connected to a Caregiver When Using a Baby Sling, Strap-on Carrier, or Their Waistband: Attach the swivel snap hook (A) directly to the fabric of the waistband, belt loop or to an enclosed loop on the strap-on carrier or baby sling. Always ensure that the area in which it is attached is not an area that will affect the safety or functionality of the sling or strap-on carrier. |
![]() As a Child Tether: Clip the swivel snap hook (A) around your child’s belt loop and have the adjustable loop end (C) around an adult’s belt, belt loop, etc. (see attaching to a closed loop or ring) For safety reasons, it is NOT RECOMMENDED to put the adjustable loop end (C) around your child’s wrist because a child often cannot tell you if it is too tight. |
![]() Attaching to a Closed Loop or Ring: When attaching an item that has a closed loop or ring (like a teething ring) or an adult's belt loop (to use as a child tether): 1) Unhook the buckle (D) 2) Feed the adjustable loop end (C) of the tether into the opening 3) Thread the buckle end (D) through center opening of the tether's loop (C) 4) Pull to tighten. 5) Reattach the buckle (D) to the other half of the tether and secure the other end to your anchor (seating device) or child's belt loop using the swivel snap hook (A). When using as a child tether, it is recommended to attach the tether to the adult's belt loop before securing the child.” |